Fire Hydrant Pipe Wrapping Tape is a High Quality pipeline corrosion resistant tape . This tape is specially designed for Long term corrosion protection of GI pipes, Buried Pipes & Fittings. This tape is made Special Grade Bituminous Compound
Excellent Self Adhesion properties
Excellent adhesion to pipe and self
Flexibility provides extra protection at vulnerable areas
Excellent conformability and consistent uniform thickness
Can withstand in extreme temperature variations
Easily applied with no special equipment
Compatible with common pipe coatings & Cold applied
PRODUCT KEY BENEFITS:
No Need of Heat for application , Excellent long term Self Adhesion properties
Not effected by water, salts or soil organics
Corrosion Protection to Buried or Immersed Pipes and Fittings.
Long term corrosion protection to pipes, flanges, valves and related surfaces.
Bare pipe lengths
Pipe rehab and repair
Insulation of Metal and cables against corrosion or Moisture ingress.
Prepare surfaces by removing all loose scale, rust or other foreign matter by wire brush. Surface must be clean, dry and free of grease. Now spirally wrap the tape with a minimum 1" overlap. For severely corrosive environments, a 55% overlap is recommended. While wrapping, press air pockets out and smooth all lap seams. For additional mechanical protection, an overwrap may be used to increase impact strength and electrical resistance
Available Width of Tape: 25 mm to 350 mm (As per Client Requirement)
Available Length of Tape: 5 Mtr, 8 Mtr , 9 Mtr to 30 Mtr Roll (As per Client Requirement)